1998 Chevrolet S10 2.2, Brake Lights Not Working

This vehicle came into the shop with a customer concern of no working brake lights.  The vehicle had been taken to another repair shop a few weeks ago and the customer was told it would cost several hundred dollars to repair the problem.

I confirmed that all three brake lights were inoperative.  This model has the customary two brake lights on the rear and a brake light called the Center High Mount Stop Light, or CHMSL for short.  All three brake lights were inoperative. (After doing some further investigation after I repaired the truck, I found the CHMSL bulbs were blown.)

This led me to a quick look at a wiring diagram, which led me to take a look at the Underhood Fuse Panel.

When I removed the cover something caught my eye, even before I could check any fuses.  I noticed something was missing.  Where I am pointing you will notice four empty cavities.  This is where the CHMSL Relay is suppose to be . . .  but it's not!  The relay would look like the relay above my finger (the grey rectangle).

I happened to have one in the shop.  I plugged it in.  Below I am pointing to the now present CHMSL Relay.

Sure enough, with a quick test of the brake pedal . . . presto!  the brake lights were working.

This is a quick post just to remind us not to overlook the small things.  Before pulling out the PowerProbe or Test light or whatever else, be sure to give a visual inspection of the components.  As this job reminds us, first make sure they are where they are suppose to be; and second, make sure they are in good/working condition.

Sometimes the easy, simple solution is the right one.